Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e. UltraCare Fuga Fresca is a ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of cementitious grout joints between tiles. If the goods are not in a re-saleable condition when they arrive back with us, Tiles-Direct reserve the right to amend the amount of the refund based on the value of re-saleable goods.

Some application examples UltraCare Fuga Fresca is used to eliminate irregularities in the colour of grout-joints caused, for example, by incorrect application of the mortar, or to eliminate unsightly stains caused during use. Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethane-based products.The light grey shade and added BioBlock Technology make the Ultracolor Plus silver grey grout a fantastic option in areas that may suffer from high humidity, Bioblock Technology acts as a mould-resistant agent making the grout easier to keep clean and looking like new. Also suitable for acid-resistant bonding and rapid setting of ceramic tiles, stone materials, fibre-cement, concrete and any other building material on all types of substrates normally used in construction.

The Ultracolor Plus grout range is fast track ready making it perfect for installations in busy spaces, ready to take light foot traffic within 3 hours, spaces can now be accessible again with the smallest delay.We follow generally accepted industry standards to protect the personal information submitted to us, both during transmission and once we receive it. UltraCare Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i. Grouting industrial floor tile finishes (galvanizing plants, tanneries, battery rooms, paper works, etc. Kerapoxy CQ is a two-component, epoxy resin-based product with very low emission of volatile organic compounds, with silica sand and other special components.

If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints.

Always apply a small sample of the product in a trial area before using Kerapoxy CQ on wider surfaces. The driver will NOT be able to assist getting the tiles into your property due to insurance purposes. When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout.

This is particularly important as tiles can be discontinued, making it a challenge to match if you don’t have spares of the originals. For more information on how to mix and apply grout in your home make sure to visit our Help and Advice section. Featuring Mapei’s specially developed DropEffect © technology is an ultra premium, fast-setting, polymer-modified, colour-consistent, non-shrinking, efflorescence-free grout for joint widths from 2mm to 2cm. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge.Look no further than Mapei Ultracolour Plus, a quick-setting and fast-drying cementitious mortar perfect for grouting joints up to 20mm wide.